- 28
- 8
Part 1
maybe I haven't done enough research, maybe I'm just wrong, or maybe I'm tweaking out of my mind for no reason but like... how is part 1 Naruto Mountain level???
lets see starting from Naruto's Ap
Naruto scales to Mountain level (100 Megatons) in his One tail Kyubi cloak because much stronger than his Kyubi Influence state and he verwhelmed Three Tomoe Sasuke, forcing him into using CS1, and then CS2, so he scales from Three Tomoe Sasuke, lets see where Three Tomoe Sasuke's Durability scales.
"Survived attacks from KN1 Naruto" Ok.... so a circle, Naruto's KN1 AP scales from Three Tomoe Sasuke's Durability which is scaled from KN1 Naruto's AP... Whatever, lets continue but this time for Sasuke's AP
Three Tomoe Sasuke is Mountain level because fully acclimating to the power of his Curse Mark and fully maturing his Sharingan, he was able to completely overwhelm KN0 Naruto, KN0 is Kyubi influence I assume, so he scales off of KN0 Naruto's Durability, lets see his durability while he's in KN0... hm... City level+... ok maybe its a mistake and the wiki meant KN1... ah, seems like KN1 scales to Sasuke's AP, doesn't say which Key but its most likely Three Tomoe Sasuke Key since its the only Key with Mountain level not including CS1 which just says "Higher", but its not talking about that since the scale specifically says 100 Megatons which Note's to Three Tomoe Sasuke, but getting back to track this yet again means one thing
Sasuke's AP is Mountain level because he overwhelmed KN0 Naruto (Who isn't mountain level) but lets say its a mistake and they meant KN1, that means his AP scales from KN1's Durability which scales from... Sasuke's AP.... that's 2 loops now...
now for Part 2 of this thread
the god damn weird ass 100 Megatons... like how is it exactly 100 Megatons, must be one extremely special as calc huh, NOPE, there is no calc, that scale is entirely based off Hebi Sasuke in his One Tomoe Sharingan Key who mind you doesn't scale to 100 Megatons, he scales to Itachi's 139.2 Megatons, the reason everyone for some odd reason scales from a character that said character doesn't even scale to is because there is a baseline for 100 Megatons! how do Naruto and Sasuke scale to a Future Sasuke is beyond me, and the fact said Baseline makes no sense either, like why is it there? just scale them to the 139.2 Megatons, mind you Taka Sasuke scales to the 100 Megatons with the Sharingan, it doesn't specify how many Tomoes but that hardly matters... HE GOT WEAKER? Why
How
like you can say he got weaker because he lost the curse mark but those scales are for the Sharingan not the curse mark, and it makes no sense for part 1 Naruto and Sasuke to scale to scale to part 2, because the scales don't line up
Part 1 Naruto in his Kyubi infuence: Durability is City level+ and his AP is City level+
Part 2 Naruto in base: City level+ Durability and City level+ AP
So part 2 Naruto's base is as strong as KN0 so we can cross off that they scale from that in any way
Part 1 Sasuke base: Multi City block durability and City level+ AP with Chidori
part 2 Sasuke in base: City level+ Durability and City level+ in AP
so that's also cleared off, they can't scale from the base forms of part 2
If the scale from keys that aren't base it makes no sense since those scales and characters have no connection to part 1 scaling for Naruto and Sasuke and they severely over power those part 1 characters in scaling and in logic, I feel like I'm talking all over the place, am I making sense? everything just keeps looping around and connecting to dead ends and doors that just lead back to nothing, let me calm down and step back to squar 1
part 3
here is the chain and I will mark every leep with Bolding.
Part 1 KN1 = Mountain level, why? because of Sasuke's durability which is Mountain level, why? because he took attacks from KN1 Naruto, and Sasuke's AP is Mountain level because he can hurt KN0 Naruto who doesn't have mountain level durability, and the characters scale to 100 Megatons because of Scales from part 2 and they scale in part 2 to 100 Megatons NOT in base and not from a calc, it was decided they just scale there as a baseline which is UNDER the scale of the character they are being scaled from.
Now what I want to see is either all this goes away (abolish it)
Or
Explain to me why I'm wrong (I feel like I'm just blabbing nonesense so calm me down please and tell me I'm tweaking)
maybe I haven't done enough research, maybe I'm just wrong, or maybe I'm tweaking out of my mind for no reason but like... how is part 1 Naruto Mountain level???
lets see starting from Naruto's Ap
Naruto scales to Mountain level (100 Megatons) in his One tail Kyubi cloak because much stronger than his Kyubi Influence state and he verwhelmed Three Tomoe Sasuke, forcing him into using CS1, and then CS2, so he scales from Three Tomoe Sasuke, lets see where Three Tomoe Sasuke's Durability scales.
"Survived attacks from KN1 Naruto" Ok.... so a circle, Naruto's KN1 AP scales from Three Tomoe Sasuke's Durability which is scaled from KN1 Naruto's AP... Whatever, lets continue but this time for Sasuke's AP
Three Tomoe Sasuke is Mountain level because fully acclimating to the power of his Curse Mark and fully maturing his Sharingan, he was able to completely overwhelm KN0 Naruto, KN0 is Kyubi influence I assume, so he scales off of KN0 Naruto's Durability, lets see his durability while he's in KN0... hm... City level+... ok maybe its a mistake and the wiki meant KN1... ah, seems like KN1 scales to Sasuke's AP, doesn't say which Key but its most likely Three Tomoe Sasuke Key since its the only Key with Mountain level not including CS1 which just says "Higher", but its not talking about that since the scale specifically says 100 Megatons which Note's to Three Tomoe Sasuke, but getting back to track this yet again means one thing
Sasuke's AP is Mountain level because he overwhelmed KN0 Naruto (Who isn't mountain level) but lets say its a mistake and they meant KN1, that means his AP scales from KN1's Durability which scales from... Sasuke's AP.... that's 2 loops now...
now for Part 2 of this thread
the god damn weird ass 100 Megatons... like how is it exactly 100 Megatons, must be one extremely special as calc huh, NOPE, there is no calc, that scale is entirely based off Hebi Sasuke in his One Tomoe Sharingan Key who mind you doesn't scale to 100 Megatons, he scales to Itachi's 139.2 Megatons, the reason everyone for some odd reason scales from a character that said character doesn't even scale to is because there is a baseline for 100 Megatons! how do Naruto and Sasuke scale to a Future Sasuke is beyond me, and the fact said Baseline makes no sense either, like why is it there? just scale them to the 139.2 Megatons, mind you Taka Sasuke scales to the 100 Megatons with the Sharingan, it doesn't specify how many Tomoes but that hardly matters... HE GOT WEAKER? Why
Part 1 Naruto in his Kyubi infuence: Durability is City level+ and his AP is City level+
Part 2 Naruto in base: City level+ Durability and City level+ AP
So part 2 Naruto's base is as strong as KN0 so we can cross off that they scale from that in any way
Part 1 Sasuke base: Multi City block durability and City level+ AP with Chidori
part 2 Sasuke in base: City level+ Durability and City level+ in AP
so that's also cleared off, they can't scale from the base forms of part 2
If the scale from keys that aren't base it makes no sense since those scales and characters have no connection to part 1 scaling for Naruto and Sasuke and they severely over power those part 1 characters in scaling and in logic, I feel like I'm talking all over the place, am I making sense? everything just keeps looping around and connecting to dead ends and doors that just lead back to nothing, let me calm down and step back to squar 1
part 3
here is the chain and I will mark every leep with Bolding.
Part 1 KN1 = Mountain level, why? because of Sasuke's durability which is Mountain level, why? because he took attacks from KN1 Naruto, and Sasuke's AP is Mountain level because he can hurt KN0 Naruto who doesn't have mountain level durability, and the characters scale to 100 Megatons because of Scales from part 2 and they scale in part 2 to 100 Megatons NOT in base and not from a calc, it was decided they just scale there as a baseline which is UNDER the scale of the character they are being scaled from.
Now what I want to see is either all this goes away (abolish it)
Or
Explain to me why I'm wrong (I feel like I'm just blabbing nonesense so calm me down please and tell me I'm tweaking)